Security - Kyocera Neo User Manual

Note: Call prompt is disabled when the phone is
in Emergency Mode.
Select Menu > Settings > Network > Roam
Call Alert > Call Prompt.
The phone emits a distinctive ring to indicate
when you are roaming during a call. To accept or
place a call while roaming, you must press 1.

Security

This section describes all the features involved in
securing your phone and preventing access to
personal information. All security features are
shielded by a four-digit lock code.
Lock Phone
Set Lock Phone
When your phone is locked, you can call only
emergency numbers or your service provider's
customer service number. You can still receive
incoming calls.
1. Select Menu > Settings > Security.
2. Enter your four-digit lock code.
3. Select Lock Phone.
4. Select OK to clear notification.
5. Select one of the following:
– Never leaves the phone always unlocked.
– On power up locks the phone every
time you turn it on.
– Now locks the phone immediately.
User Guide
Unlock Phone
Do the following to unlock the phone:
• From the home screen, select Yes.
• Enter your four-digit lock code.
Set Limit Calls
You can limit the calls that can be made from your
phone to emergency numbers, your contacts, and
your service provider's numbers.
1. Select Menu > Settings > Security.
2. Enter your four-digit lock code.
3. Select Limit Calls and one of the following:
– No Limit does not limit calls.
– Limit Outgoing limits outgoing calls.
Incoming calls can be answered.
– Limit All limits both incoming and
outgoing calls.
Assign ICE Numbers
The ICE (in case of emergency) numbers feature
allows you to specify three personal phone
numbers that can be called when the phone is
locked.
1. Select Menu > Settings > Security.
2. Enter your four-digit lock code.
3. Select ICE Numbers.
4. Select an Unassigned slot.
5. Enter the number and select Done.
65