End Phone Calls; Activate Voice Dialing; Volume Control; Use Speed Dialing - Kyocera Neo User Manual

Hide thumbs Also See for Neo:
Table of Contents

Advertisement

Answer Using Speakerphone
Press the Speakerphone key.
Answer Using Flip
You can set the phone to answer immediately
when you open the flip. This feature does not
apply to incoming data calls. For more
information, see "Enable Open to Answer" on
page 59.

End Phone Calls

To end a phone call press the End key.

Activate Voice Dialing

1. Press and hold the Send key.
2. Follow the prompts.
For more informaton, see "Voice Commands" on
page 80.

Volume Control

There are several ways to control the volume of
your phone.
Adjust Volume during a Call
To adjust the earpiece volume during a call, press
the Volume key up or down.
Use the Speakerphone
Your phone has a built-in speakerphone.
• To turn on the speakerphone, press the
Speakerphone key. The speakerphone icon
User Guide
appears on the home screen when the
speakerphone is on.
• To turn off the speakerphone, press the
Speakerphone key again.
Note: If you press the Speakerphone key during
an incoming call, you will answer the call.
Silence an Incoming Call
• To silence the phone without answering the
call select Silence, press the Back key, or
press the Volume key.
• To silence the phone and answer the call,
select Silence and then press the Send key.
Note: In the absence of voicemail, this feature
drops the call.

Use Speed Dialing

Speed dialing allows you to assign a one- or
two-digit shortcut to a contact. Before you can use
speed dialing you must save a phone number as a
contact and assign a speed dial location to it. See
"Customize a Number" on page 28.
To call a contact that has a speed dial location.
1. Enter the one- or two-digit speed dial
location.
2. Press the Send key.
19

Advertisement

Table of Contents
loading

Table of Contents