Work With Messages - Kyocera Neo User Manual

4. You will see a notification. Select Yes to
erase the message.
Note: You can erase a scheduled message, but
you cannot cancel delivery of the message.
Erase All Messages
1. Select Menu > Messaging > Erase Msg >
Inbox, Outbox, Sent Msgs, Saved Msgs,
Drafts or All.
To erase messages from all folders, select
All.
2. You will see a notification. Select Yes to
erase the messages.

Work with Messages

Here are some tips about messaging with your
phone.
Unable to Send Messages
You may not be able to send or receive messages
if your phone's memory is nearly full, or if digital
service is not available at the time. To free up
memory, erase old messages. See "Erase
Messages" on page 41.
Appended Messages
If you go over the character limit for a single
message, the phone may automatically append an
empty segment to your message to make space.
Warning: Your service provider will charge you
for each message segment.
42
When you start a message, the maximum
character limit appears once you are in the
message entry field. This number counts down as
you enter characters, until it reaches 0.
If you continue to enter text after this counter
reaches 0, a message segment may be appended.
When you reach the message size limit, you are
prompted to edit the message or alerted that the
message is being appended.
Note: Not available on all phones. Check with
your service provider.
Incoming Calls while Creating
Messages
If you receive a call while receiving a message you
will receive a notification. You can do the
following:
• Select Ignore to not answer the call. You will
return to the message screen.
• Press the Send key to answer the call. The
message will be saved to the Drafts folder.
Complete Messages in Drafts Folder
To continue composing a message in the Drafts
folder:
• Select Menu > Messaging > Drafts.
• Select the message your wish to complete.
• Select Edit.
• Complete your message.
• Select Send.
Work with Messages