Table of Contents
Advertisement
13 Voice Commands
Voice commands allow you to call a contact, dial a
phone number, access menus, or find contact
information from your voice dial list.
Note: You cannot use voice recognition to end a
call; you must press the End key when the flip is
open.
Voice Dial List
To call or find a contact using voice dial you must
add the contact to your voice dial list. The contact
name must not have more than three words or
components in a contact name for voice dialing
recognition.
Add Contacts
To call or find a contact using voice dial you must
add the contact to your voice dial list. The contact
name must not have more than three words or
components in a contact name for voice dialing
recognition.
To add a contact to your voice dial list:
1. Select Menu > Contacts > Voice Dial
List.
2. At the contact list, highlight a contact and
press the OK key. A check mark appears
next to a name when voice dialing is active.
Check each name you wish use with voice
dialing.
3. Select Save.
80
Remove Contacts
To remove a contact from your voice dial list:
1. Select Menu > Contacts > Voice Dial
List.
2. At the contact list, highlight a check marked
contact and press the OK key. No check
mark appears next to a name when voice
dialing is inactive. Uncheck each name you
wish remove from voice dialing.
3. Select Save.
Voice Commands
Start Voice Commands
1. From the home screen, press and hold the
Send key to initiate voice commands. The
phone prompts, "Say a command".
2. Say one of the following commands and
following the voice prompts.
– "Contact <name>" sends call to a
contact on your voice dial list.
– "Dial Number <number>" sends call
by speaking the digits of the phone
number.
– "<shortcut name>" sends you to a
menu item.
– "Find Contact" allows you to find a
contact from your voice dial list.
Voice Dial List
Advertisement
Table of Contents
