Voice Features - Kyocera Neo User Manual

Enable Any Key Answer
Set your phone to answer a call when press any
key.
Select Menu > Settings > Convenience > Any
Key Answer > Enabled.

Voice Features

Following features allow you to customize the
voice commands.
Enable Automatic Add
You can set the phone to automatically add a
contact to your voice dial list when you create a
new contact.
Select Menu > Settings > Voice Features >
Automatic Add > Enabled.
Set Expert Mode
When expert mode is used, instead of speaking a
command following the initial voice prompts, you
can speak the command after you hear a tone.
Select Menu > Settings > Voice Features >
Expert Mode and one of the following:
• Normal sets phone to default voice prompts.
• Expert sets phone to sound tones instead of
voice prompts.
60
Set Display Results
You can set the phone to display up to three
recognition contacts when calling or searching
for a contact with voice commands.
Select Menu > Settings > Voice Features >
Display Results > Single Best or Three Best.
Set Digit Lengths
You can set the number of digits used for a phone
number in your voice dial list.
Select Menu > Settings > Voice Features >
Digit Lengths and one of the following:
• North American allows 7, 10, and 1 + 10
digits in a phone number.
• Permit All allows 4-14 digits in a phone
number.
Voice Answer
Enable Voice Answer
You can set your phone to answer a call with your
voice when using a headset.
1. Disable the Auto-Answer feature, see "Enable
Auto-Answer" on page 62.
2. Set the phone to normal sounds, see "Set
Ringer Mode" on page 53.
3. Set the phone to play sound from the
headset, see "Set Headset Sounds" on page
61.
4. Select Menu > Settings > Voice Features
> Voice Answer > With Accessory.
Voice Features