Network - Kyocera Neo User Manual

Enable Auto-Answer
When a headset is attached to your phone, the
phone can be set to answer automatically.
Select Menu > Settings > Accessories >
Auto-Answer > After 5 Seconds. The phone
will automatically answer after 5 seconds.
Enable TTY
You can connect the phone to a teletype (TTY)
device for the hearing impaired.
Note: Enable TTY only when using the phone with
a TTY device.
1. Connect the TTY device to your phone.
2. Select Menu > Settings > Accessories >
TTY Device.
3. At the notification, select OK.
4. Select on of the following options:.
– TTY Off to disable TTY.
– TTY On to enable for TTY devices.
– TTY On + Talk to enable for TTY
devices and voice carry over.
– TTY On + Hear to enable for TTY
devices and hearing carry over.
Note: You can also enable TTY when you enter
##889 with your keypad and select TTY.
62
Set Com Port Speed
The Com Speed sets the data rate at which your
phone connects to a laptop or PC.
Select Menu > Settings > Accessories > Com
Port Speed and a speed.
Check with your service provider for details.
Enable Hearing Aid
You can use your phone with a T-coil hearing aid
device.
Note: Enable hearing aid feature only when using
the phone with a T-coil hearing aid device.
1. Connect the T-coil hearing aid device to your
phone.
2. Select Menu > Settings > Accessories >
T-coil Hearing Aid.
3. At the notification, select OK.
4. Select Enabled.

Network

Your phone has several settings for how your
phone connects to a network.
Enable Date Mode
Your phone may be able to receive certain data,
depending on the system sending the information.
You cannot receive voice calls while the phone is
in data mode. To receive data, you must connect
the phone to a laptop or PC and switch the phone
from voice mode to data mode.
Network