Water Trap / FLter MaNtenance; Emptying The Water Trap Chamber; Replacing The Filter Element - Bacharach PCA 2 24-9448 Operating & Maintenance Instructions

Maintenance
6.2 Water Trap / Filter Maintenance

6.2.1 Emptying the Water Trap Chamber

The water trap chamber should be empted after every test, or when the
water condensate approaches the tp of the rser tube (refer to Secton 4.9).
1. Remove water trap chamber per Fgure 6-5.
2. Pour out lqud condensate, and then reassemble trap.

6.2.2 Replacing the Filter Element

Replace the flter element when t becomes vsbly drty or becomes satu-
rated wth water.
Material Required: • Flter Element, P/N 07-1644
1. Remove water trap chamber per Fgure 6-5.
2. Pry apart flter chamber usng a small flat-blade screwdrver. Remove
and dscard old flter.
3. Install new flter and reassemble flter chamber, makng sure that
surfaces "A" and "B" contact each other.
4. Reassemble trap.
Pull apart
using a
twisting
motion.
DO NOT
rock back
and forth!
Figure 6-5. Disassembling the Water Trap / Filter Assembly
6-6
• Small Flat Blade Screwdrver
FILTER
CHAMBER
WATER
TRAP
CHAMBER
Pry apart
filter chamber
using a small
flat-blade
screwdriver
inserted into
notch
FILTER
ELEMENT
When reassem-
bling filter chamber,
make sure surfaces
"A" and "B" contact
each other
Instruction 24-9448