Rotary Switch Setting: Time Program; Rotary Switch Setting: Remote Param - Rotex HPSU compact 304 Instruction Manual

6 x Parameter settings

6.8 Rotary switch setting: Time Program

Parameter
Party With this operating mode we can set a one-off time for the temporary heating time extension
of the internal heating circuit.
Away With this operating mode we can set a one-off time for the temporary regulation to the param-
eterised absence temperature.
Vacation The internal heating circuit provides continuous (24 h per day) regulation to the parameterised
absence temperature (parameter T-Reduced).
A calendar function can be used to enter a time period for the absence.
Holiday A calendar function can be used to enter a time period for presence.
HC Program 1 In this menu we can parameterise the 1st timer programme for the internal heating circuit.
3 switching cycles with a resolution of 15 minutes can be set. A separate entry for each week-
day is possible. Format: (on) hh:mm - hh:mm (off)
Also, the cycles can be parameterised from Monday to Friday, Saturday to Sunday and Mon-
day to Sunday.
HC Program 2 In this menu we can parameterise the 2nd timer programme for the internal heating circuit.
3 switching cycles with a resolution of 15 minutes can be set. A separate entry for each week-
day is possible. Format: (on) hh:mm - hh:mm (off)
Also, the cycles can be parameterised from Monday to Friday, Saturday to Sunday and Mon-
day to Sunday.
DHW Program 1 In this menu we can parameterise the 1st timer programme for hot water generation. 3 switch-
ing cycles with a resolution of 15 minutes can be set. A separate entry for each weekday is
possible. Format: (on) hh:mm - hh:mm (off)
Also, the cycles can be parameterised from Monday to Friday, Saturday to Sunday and Mon-
day to Sunday.
DHW Program 2 In this menu we can parameterise the 2nd timer programme for hot water generation. 3 switch-
ing cycles with a resolution of 15 minutes can be set. A separate entry for each weekday is
possible. Format: (on) hh:mm - hh:mm (off)
Also, the cycles can be parameterised from Monday to Friday, Saturday to Sunday and Mon-
day to Sunday.
Circulation Time In this menu we can parameterise a timer programme for the circulation pump. 3 switching cy-
cles with a resolution of 15 minutes can be set. A separate entry for each weekday is possible.
Format: (on) hh:mm - hh:mm (off)
Also, the cycles can be parameterised from Monday to Friday, Saturday to Sunday and Mon-
day to Sunday.
Tab. 6-10 Parameter in rotary switch setting "Time Program"

6.9 Rotary switch setting: Remote Param

Parameter
Bus - Scan Off: No function
On: Control checks which RoCon devices are connected to the system using the CAN bus
lines. Devices that are detected are displayed with their type and data bus ID 
(For example: MM#8 = Mixer module with bus ID 8).
The selection and activation of a device with the rotary switch switches the function of the 
control unit to that of the selected device (see chapter 3.4.9).
No selection Activation switches to the local device.
Contr BM1/BE1 #X Activation switches to the HPSU compact with the bus ID X.
Mix Valve #X Activation switches to the mixer module with the bus ID X (see section 6.12.1, parameter 
[HC Assignment]).
Tab. 6-11 Parameter in rotary switch setting "Remote Param"
34
Designation
Description
Access Setting range Factory
Min / Max setting
BE HF
E E 00:00 - 06:00 00:00
E E 00:00 - 06:00 00:00
E E Date on first -
day
-
Date on last
day
E E Date on first -
day
-
Date on last
day
E E See See
chapter 3.4.7 tab. 3-7
E E See See
chapter 3.4.7 tab. 3-7
E E See See
chapter 3.4.7 tab. 3-7
E E See See
chapter 3.4.7 tab. 3-7
E E See See
chapter 3.4.7 tab. 3-7
Access Setting range Factory
Min / Max setting
BE HF
E E Off Off
On
E E
E E
E E
BA ROTEX HPSU compact 4 - 09/2013
Increment
1 h
1 h
1 Day
1 Day
15 min
15 min
15 min
15 min
15 min
Increment
-
-
-
-