Table of Contents
Advertisement
If your monitor fails to operate correctly, consult the following chart for possible
solution before calling for repairs/RMA.
Condition
The screen is not synchronized?
The Picture does not appear?
The position of the screen is not in the
center?
The screen is too bright/dark.
Trouble Shooting
1. Check if the signal cable is
2. Check if the output level
3. Make sure the signal timings of
4. If your computer was working
5. Make sure the power cord is
6. Check if the signal cable is
7. Check if the Power is ON at the
8. Check if the brightness control
9. Press the Auto button. Adjust
10. Check if the brightness or
17
Possible Solution
firmly seated in the socket.
matches the input level of your
computer.
the computer system are within
the specification of the monitor.
with a CRT monitor, you should
check the current signal timing
and turn off your computer
before you connect the VGA
Cable to this monitor.
plugged into the power outlet
and into the back of the
monitor.
firmly seated in the socket.
computer
is at the appropriate position,
not at the minimum.
the image position using the
Horizontal Position and/or
Vertical Position in OSD Main
Controls.
contrast control is at the
appropriate position, not at the
Maximum/Minimum.
Advertisement
Table of Contents
