winsonic CH1905-EN25L0 Manual

Lcd monitor osd operation

Download this manual

Winsonic LCD Monitor OSD Operation

Control Functions

The Monitor control functions are located on the lower side of the panel.

The control key description

1. MENU

2. Down

4. Auto

Description

1. Menu

Press the Menu key to activate the on screen display screen. It is a toggle key. Press twice to

turn off the OSD. After 15 sec. idle time, the OSD screen will automatically turn off.

2. UP & Down : Select key

The two keys have two sets of functions:



When OSD screen is not activated, the two keys are used to adjust the Backlight.



When OSD screen is activated (When "Menu" key is pressed), the two keys are used

to select the wanted adjustment items

Auto

Press Auto Key to selection signal source .

: Power switch

Use the power switch to turn ON or OFF power. We recommend turning your system power on

first, then the LCD monitor.

Activate the on-screen-display function

Mute On /Off or Brightness down control

Brightness up control

Signal Source

Power On/ Off

Table of Contents

Page 1 Winsonic LCD Monitor OSD Operation Control Functions The Monitor control functions are located on the lower side of the panel. The control key description 1. MENU Activate the on-screen-display function 2. Down Mute On /Off or Brightness down control Brightness up control 4.
Page 2: Adjusting The Monitor
DJUSTING THE MONITOR The LCD monitor is designed to work with a range of compatible video adapters on the market. Due to the possible deviations between these video adapters, you may make some adjustment to fit the monitor for adapter used. ADJUSTMENT PROCEDURE First, you must activate the OSD screen through pressing the MENU key, the screen will show in the center of screen as below:...
Page 3: Sound Setting
On AV / HDMI by DVD player. SOUND SETTING Equalizer/ Volume / Sound Mode / AVC / Surroubd  Press Menu Key back to the tool bar.  Use Auto key to select the required adjustment item.  Use Up or Down key to confirm required item. ...
Page 4: Osd System
OSD SYSTEM Language / OSD H.Position / OSD V.Position / TIMER/HALFT/SLEEP-TIMER / Recall  Press Menu Key back to the tool bar.  Use Auto key to select the required adjustment item.  Use Up or Down key to confirm required item. ...
Page 5 OSD PIP MULTI WIN OFF / PIP /POP  Press Menu Key back to the tool bar.  Use Auto key to select the required adjustment item.  Use Up or Down key to confirm required item.  Use Up or Down key to adjust the desired function or press Menu Key end..