Table of Contents
Advertisement
A
The LCD monitor is designed to work with a range of compatible video adapters on the market. Due to
the possible deviations between these video adapters, you may make some adjustment to fit the monitor
for adapter used.
ADJUSTMENT PROCEDURE
First, you must activate the OSD screen through pressing the MENU key, the screen will show in the
center of screen as below:
Use the ∇ & ∆ key to select the required adjustment item up or down.
Use Menu key to do the desired function or go into the second menu item to do the further
change.
Use the ∇ & ∆ key to select the Exit
OSD screen will automatically turn off.
AD Board Specification
DJUSTING THE MONITOR
OSD SCREEN
the Exit
item to
item to turn off OSD. Or After 30 sec. idle time, the
Advertisement
Table of Contents
