2.2 Using a USB Mouse
Item
Click
Single- click
Double-click
Left Button
Click and
drag
Right Button
Single-click
Scroll up
Scroll-wheel
Scroll down
2.3 Hard Disk Installation
2.3.1 MS-N7000 series Hard Disk Installation
Step1. Unscrew the back and both sides' screws to open the upper lid.
Step2. Install the hard disks into NVR with screws shown in below pictures. (SATA Slots of hard
disk should be toward inside NVR.)
Step3. Join the power and data connectors to corresponding hard disk.
MS-N7032-UPH:
Description
Live view: select the channel and show the toolbar of live view.
Menu: select and confirm.
Switch between single screen to multi-screen when in live view
mode and playback mode.
(1) Control rotation direction in PTZ mode.
(2) Set the target area in tamper-proof, motion detection and
privacy mask alarm settings.
(3) Drag the digital zoom area.
(4) Drag the channel and the time scroll bar.
Live view: shows pop-up menu.
Menu: exit and go to Live View.
Scroll up the page.
Scroll down the page.
10
Need help?
Do you have a question about the MS-N1009-UNT and is the answer not in the manual?