Subscribe to Our Youtube Channel
Related Manuals for CTC Union FMC-1000-PH
Summary of Contents for CTC Union FMC-1000-PH
- Page 1 Quick Installation Guide FMC-1000-PH FMC-1000S-PH 10/100/1000Base-T to 1000Base-FX or 100/1000Base-X SFP with PoE+ (PSE) Fiber Converter sales@ctcu.com...
- Page 2 8F, No. 60 Zhouzi St., Neihu, Taipei 114, Taiwan T +886-2-26591021 F +886-2-26590237 E sales@ctcu.com H www.ctcu.com 2021 CTC Union Technologies Co., LTD. All trademarks are the property of their respective owners. Technical information in this document is subject to change without notice.
- Page 3 CTC Union Technologies makes no warranty, representation, or guarantee regarding the suitability of its products for any particular purpose, nor does CTC Union assume any liability arising out of the application or use of any product and specifically disclaims any and all liability, including without limitation any consequential or incidental damages.
-
Page 4: Table Of Contents
Table of Contents Introduction .................. 5 Features ..................5 Specifications ................6 .................... 6 THERNET NTERFACE ....................6 PTICAL NTERFACE ....................6 WITCH EATURES ..................6 OWER OVER THERNET ......................7 OWER ...................... 7 ECHANICAL ....................7 NVIRONMENTAL ....................7 ERTIFICATIONS MTBF (MIL-HDBK-217) .................. -
Page 5: Introduction
Introduction FMC-1000-PH & FMS-1000S-PH are unmanaged Gigabit PoE (Power over Ethernet) converters that provide stable and reliable Fast and Gigabit Ethernet transmission. PoE technology describes a system to pass electrical power safely, along with data, on Ethernet cabling. The original IEEE 802.3af-2003 PoE standard provides up to 15.4W of power to the connected device. -
Page 6: Specifications
• Speed: 10/100/1000M (Auto) Optical Interface • Standards: IEEE802.3u (100Base-FX), 802.3z (1000Base-X) • Interface: 1 x fixed fiber (FMC-1000-PH) or 1 x SFP slot (FMC-1000S-PH) • Speed: 1000M (FMC-1000-PH) or 100/1000M (FMC-1000S-PH) Switch Features • Store & Forward Switch mode or Pass Through Converter mode •... -
Page 7: Power
FMC-1000S-PH 31.7W Mechanical • Dimensions: 108 mm (D) x 74 mm (W) x 23 mm (H) • Mounting: Wall mounting (optional) • Weight: 90g (FMC-1000-PH), 80g (FMC-1000S-PH) Environmental • Operating Temperature: 0°C~50°C • Storage Temperature: -40°C~85°C • Humidity: 10%~90% (Non-condensing) Certifications •... -
Page 8: Panels
Panels ➢ FMC-1000-PH ➢ FMC-1000S-PH Figure 1. Figure 2. Figure 3. Rear Panel Top Panel Front Panel Description LAN connection Fixed Fiber interface SFP Fiber slot LED indicators DIP Switch Power input... -
Page 9: Lan & Fiber Ports
LAN & Fiber Ports FMC-1000-PH & FMC-1000S-PH PoE have 1 electrical LAN port and 1 fixed fiber port or 1 SFP-based slot on the front panel. The LAN port utilizes shielded RJ-45 connector that supports 10/100/1000M; while the fiber SFP port supports 1000M (FMC-1000-PH) or 100/1000M (FMC- 1000S-PH). -
Page 10: Rj-45 Ethernet & Poe Pin Assignments
RJ-45 Ethernet & PoE Pin Assignments RJ-45 Ethernet Pin No. PoE Output 100Base-TX 1000Base-T TRD 0+ TRD 0- TRD 1+ TRD 2+ TRD 2- TRD 1- TRD 3+ TRD 3- DIP Switch Function Descriptions Pole No. Status Setting Function Description OFF * Disable Disable link fault pass through. -
Page 11: Led Indicators
LED Indicators Color Description Green Lit if power is connected and active. Power is not connected. Green The connected LAN speed is 1000M. 1000 No 1000M Ethernet link. Green The connected LAN speed is 100M. No 100M Ethernet link. Green Full duplex mode. -
Page 12: Wall Mounting Option
Wall Mounting Option FMC-1000-PH & FMC-1000S-PH standalone converters have the option of adding wall mount capability. One wall mount kit is required for installing a single standalone unit on the wall. Each wall mount kit provides all the necessary hardware for a complete installation. - Page 13 Version Date Description 2021/6/21 Use new document format...
Need help?
Do you have a question about the FMC-1000-PH and is the answer not in the manual?
Questions and answers