ABB 266 MODBUS User Manual page 90

Menu
Calibrate
Diagnostics
82 | 266 MODBUS® multivariable transmitter User manual 2105216 Rev. AB
Table 18: HMI menu structure, continued
Submenu 1
Diff. Press. Sensor
Static Press. Sensor
Process Temp Sensor
Reset All
Monitoring
Submenu 2
Calibration Units
Low Trimming
High Trimming
Save to User
Reset to User
Reset to Factory
Calibration Units
Low Trimming
High Trimming
Save to User
Reset to User
Reset to Factory
Calibration Units
Low Trimming
High Trimming
Save to User
Reset to User
Reset to Factory
To Factory Cal.
To User Cal.
Diff. Pressure
Static Pressure
Sensor Temperature
Process Temperature
Appendix A HMI menu structure
Selections or Description
Pa inH2068F
Mpa inH2060F
bar inH204C
PSI Torr
kPa Atm
mbar g/cm2
Stores DP sensor settings in the
transmitter's nonvolatile memory
Reverts to the last Save to User DP settings
Reverts to DP sensor settings as shipped
from the factory
Pa inH2068F kg/cm2
Mpa inH2060F mmH2068F
bar inH204C ftH2068F
PSI Torr inHgOC
kPa Atm mmHgOC
mbar g/cm2
Stores SP sensor settings in the
transmitter's nonvolatile memory.
Reverts to the last Save to User SP settings.
Reverts to SP sensor settings as shipped
from the factory.
Degree: °C, °F, °R, °K
Stores RTD sensor settings in the
transmitter's nonvolatile memory.
Reverts to the last Save to User RTD
settings.
Reverts to RTD sensor settings as shipped
from the factory.
Reverts all settings as shipped from the
factory.
Reverts all settings to the last Save to User
settings.
kg/cm2
mmH2068F
ftH2068F
inHgOC
mmHgOC