Typographical Conventions - ABB 266 MODBUS User Manual

Typographical conventions

The following conventions are used throughout this manual.
Element
Cross-reference to a figure or table in the
document
Cross-reference to a specific section in the
document
Greater than character (>)
Menu item names in instructions
Programs, including utility and accessory
programs
URL
User input
Convention
Hyperlink the figure or table label and
number. If the figure or table is not
immediately following the cross-reference,
add the page number where it is located.
Hyperlink both the section number and title,
with the section title in italics
Indicates that the following item is an
additional menu selection.
Bold text and the capitalization of names
agrees with the names as displayed on the
HMI menu.
Title capitalization
All lowercase for a fully specified URL. If
necessary, break long URLs before a
forward slash or break a long URL before it
begins
Lowercase, unless case sensitive. Bold or
italic, depending on element. If the user input
string contains placeholder text, use italics
for that text.
vii
Example
See Figure 2 or See Table 3 (page 12).
Go to section 2.1, Device setup.
Use the key pad to locate and select
Calibrate > Diff. Press. Sensor >
Calibration Units > Edit.
Use the right soft key to enter the Main
Menu.
Microsoft Word
http://www.microsoft.com/
seattle.sidewalk.com
Type Name tag