Error Displays Regarding Recording Of Proxy Data - Panasonic AJ-YDX30G Operating Instructions Manual

Video encoder board
Table of Contents

Advertisement

Error displays regarding recording of proxy data

If an error occurs during proxy data recording, refer to the following for the appropriate action.
Error display
(
Viewfinder and LCD monitor)
PROXY BOARD ERROR
or,
PROXY REC WARNING
NEAR END ( SD )
EOM ( SD )
SD CARD WRITE ERR
NO SD CARD
or,
SD CARD PROTECTED
Operation and causes
Recording of the proxy data will stop, but
recording of the material will continue.
Problem in this board
(PROXY BOARD ERROR)
Problem in proxy data
(PROXY REC WARNING)
If an error occurs in recording the proxy
data, proxy data in the recording are
processed as follows.
P2 data recorded on the P2 card is
deleted.
Proxy data recorded on the SD
memory card cannot be restored.
Recording of the material and proxy
data continues.
Remaining recording space of the SD
memory card is low. (As a guide, less
than about 1 minute)
Recording of the proxy data to the SD
memory card stops, but the recording to
the P2 card continues.
SD memory card is full.
Recording of the proxy data will stop,
but recording of the material will
continue.
Displayed when the REC MEDIA item on
the <PROXY SETTING> screen of the
configuration menu is set to P2&SD, but
proxy data cannot be recorded on the SD
memory card.
_ Message is displayed at the start of recording
SD memory card formatted in an
unsupported format.
SD memory card contains more than
1,000 recorded clips.
Proxy data is not recorded on the SD
memory card, but it is recorded on the
P2 card.
_ Message is displayed during recording
SD memory card removed during
recording.
Error occurs during recording on the
SD memory card.
Proxy data is not recorded on the SD
memory card, but it is recorded on the
P2 card.
No SD memory card is inserted.
(NO SD CARD)
The SD memory card is protected.
(SD CARD PROTECTED)
Action
The proxy data is not recorded correctly.
Check the playback of the record after
turning off the power of the P2 cam once
and turning it on again.
Insert a new SD memory card after
recording ends.
Insert new SD memory card after the
recording is completed.
The proxy data recording to the SD
memory card will be deleted.
To restore the deleted proxy data, select
the clip on P2 card, and copy it onto the SD
memory card (see page 13 ).
Check the status of the SD memory card,
and insert another recordable card (see
page 8 ).
Check the status of the SD memory card.
E-12

Advertisement

Table of Contents
loading

Table of Contents