Proxy Configuration - Panasonic AJ-YDX30G Operating Instructions Manual

Proxy configuration

Configuration menu
To record proxy data with the P2 cam, perform
configuration on the <PROXY SETTING> screen
in the SYSTEM SETTING page of the
configuration menu.
When this board is installed in the P2 cam, the
following configuration menu items are enabled.
PROXY SETTING screen
Item/
Variable
Data
range
storage
REC MEDIA OFF
P2
P2&SD
- C U F -
REC MODE STD 2CH MP4
(HD) LOW 2CH MOV
HQ 2CH MOV
HQ 4CH MOV
SHQ 2CH MOV
- C U F -
REC MODE STD 2CH MP4
(SD) LOW 2CH MOV
- C U F -
TC SUPER OFF
UPPER
LOWER
- C U F -
Remarks
Select media for proxy data
recording.
OFF: No proxy data is
recorded.
P2:
Proxy data is
recorded on the P2
card.
P2&SD: Proxy data is
recorded on both the
P2 card and the SD
memory card.
Specify the recording mode
of proxy data recording. (HD
mode only)
For details of each mode,
see " Recording modes and
recording signals (video
and audio) " (page 7).
Specify the recording mode
of proxy data recording. (SD
mode only)
For details of each mode,
see " Recording modes and
recording signals (video
and audio) " (page 7).
Specify an option for
superimposing the time
code display on the video
recorded as proxy data.
OFF: Time code display is
not superimposed on
the recorded video.
UPPER:
Time code display is
superimposed on the
upper area of the
recorded video.
LOWER:
Time code display is
superimposed on the
lower area of the
recorded video.
Item/
Variable
Data
range
storage
PROXY DISP OFF
ON
- C U F R
STREAMING OFF
MODE RTP
HTTP
- C U F -
is the factory setting mode.
Proxy data cannot be recorded in the following
modes even if the REC MEDIA item is set to
"P2" or "P2&SD".
INTERVAL REC (including ONE SHOT REC)
LOOP REC
In ONE CLIP REC mode, when a clip can be
recorded combined with the previous clip (when
"1¢CLIP" is displayed), the proxy function
cannot be set. Close the menu once, hold down
the STOP button for about 2 seconds to end
clip consolidation, and try again.
Changes may occur to the PROXY SETTING
menu when using a P2 camera with this board
loaded to read SD memory card data written
from the <SD CARD READ/WRITE> screen of
the FILE page in the SETTING MENU of a P2
camera that does not have this board loaded.
Remarks
Select whether to display a
message on the Viewfinder
and the LCD monitor when
starting proxy data
recording.
OFF: No message is
displayed.
ON:
A message is
displayed.
<Notes>
It is also displayed on VF
INDICATOR screen.
Write/read cannot be done
on the SD Memory Cards
unless VF MENU R/W item
is set to ON in the <SD
CARD R/W SELECT>
screen of FILE page.
Selects the mode for the
streaming function.
OFF:
Stops the streaming
function.
RTP:
Selects RTP mode.
HTTP: Selects HTTP live
streaming mode.
<Note>
This is displayed only when
the wireless LAN function is
enabled. For further details,
refer to the User Guide of
the Wireless LAN Upgrade
Software Key
(AJ-SFU3100G, optional).
E-6