Chapter 7 Error indication and Clear Error
7-1 Error indication
You can see some errors' contents by Configurator WD status error code.
Error code
Item
0x26
ROM error
0x21
RAM error
0x60
System error 1
0x61
System error 2
0x62
System error 3
7-2 How to clear the error
You can clear signal converter's error when error LED is blinking by the below 2 methods.
・Power off and on again or pressing for 2 or more seconds make system reset.
・Turn the power on with pressing reset switch in order to initialize the settings.
(It initializes all settings by software.)
Phone: 800.894.0412 - Fax: 888.723.4773 - Web: www.clrwtr.com - Email: info@clrwtr.com
Contents
Flash ROM setting read failure
RAM read failure
Task formation failure
RS485, RS232C initialize failure
TCP initialize failure
23
Error indication