Specifications - Thermo Scientific 815 Operating And Maintenance Manual

Specifications

Section 7
Temperature Range
External dimensions D x W x H (mm/in)
Internal dimensions D x W x H (mm/in)
Chamber volume (L / cu ft)
Shelves (supplied / max
Shelf size W x D (mm / in)
Loading capacity per shelf (kg / lbs)
Weight (kg / lbs)
Shipping weight (kg / lbs)
Power line voltage (±5%) / frequency
Power rating ***
Max current ***
Plug type
Max. BTU output
Access port diameter (mm / in)
Safety Specifications
* Installation category (overvoltage category) defines the level of transient overvoltage which the instrument is designed to withstand
safely. It depends on the nature of the electricity supply and its overvoltage protection means. For example, in CAT II which is the
category used for instruments in installations supplied from a supply comparable to public mains such as hospital and research
laboratories and most industrial laboratories, the expected transient overvoltage is 2500V for a 230V supply and 1500V for a 120V
supply.
** Pollution Degree describes the amount of conductive pollution present in the operating environment. Pollution Degree 2 assumes
that normally only non - conductive pollution such as dust occurs with the exception of occasional conductivity caused by condensation.
*** Measured at ambient temperature of 32°C / 90°F
Thermo Scientific
787 x 864 x 1956 / 31 x 34 x 77
508 x 673 x 1448 / 20 x 26.5 x 57
115V / 60Hz
650 W
6.2 A
115V / Nema 5-15P
30 / 1.2
Indoor use
Altitude: 2,000 meters
Temperature: 5°C to 40°C
Humidity 80% RH at or below 31°C, decreasing linearly to 50% RH at 40°C
Mains Supply Fluctuations Rated Voltage ±10%
Installation Category II *
Pollution Degree 2**
Class of Equipment I
-10°C to +50°C
566 / 20
4 / 6
642 x 422 / 25.3 x 16.6
22.6 / 50
125 / 275
143 / 315
230V / 50/60Hz
230V / Nema 6-15P
2220 (650W)
Refrigerated Incubator
650 W
3.1 A
30 / 1.2
7-1