Thermo Scientific 815 Operating And Maintenance Manual page 37

Section 6
Factory Options
Using the Communication
(continued)
6-6 Refrigerated Incubator
The following table lists the available commands for monitoring or
controlling your unit.
View
Description:
Command:
A? Actual Temperature
T? Setpoint Temperature
R? Baud Rate
S? Status Update Time
V? EPROM Version Number
D? Status Display Type
O? Display the Alarm Status
To View Data: If Status Update Time is "0.0" no data will automatically
be displayed. To view data within a particular command code, type that
command code followed by the question mark (?) symbol and then
ENTER (Return).
Example: To view Setpoint Temperature type: T? <CR>
To Change Data: To change the value within the command type the
command code followed by the new value and ENTER (Return).
Example 1: To change Setpoint Temperature to 25.0°C type: T25.0
<CR>
Example 2: To change Setpoint Temperature to -.8°C type: T-.8<CR>
(A) Actual Temperature: The actual temperature within the incubator.
(T) Setpoint Temperature: The temperature at which the user has selected
the incubator to operate.
Unit: Range:
Degrees -10 to 50
Degrees -10 to 50
- 0 - 5
- 0 - 8
- Current Rev.
- 0 - 2
- 0 - 2
Change
Command
Read Only
T10 thru T50
R0 thru R5
S0 thru S8
Read Only
D0 thru D2
Read Onl
Thermo Scientific