Photo Timelapse Mode - edelkrone ACTION MODULE User Manual

6. "PHOTO TIME LAPSE MODE"
If you are a DSLR / mirrorless user, you could perform time lapse shots with the help of the Photo Time Lapse Mode. Attach the
trigger cable, select the mode and follow these steps. If Action Module is not on Photo Time Lapse Mode, turn o the device
and turn it on again to be able to choose Photo Time Lapse Mode.
GET ME TO MY END POINT!
1. Use LEFT/RIGHT buttons to move your camera
to the end point position. By choosing same end and
start points you could perform Steady Time-Lapse.
WHEN SHALL WE GET STARTED?
8. Push UP/DOWN buttons to choose
when to start. Now, or set a countdown.
TIMELAPSE STARTS IN
9. The system will start begin the countdown to your
time lapse.
To go back to previous question press OK and wait 3 secs.
Action Module can perfom time lapses up to 365 days. Be prepared the unit by either hot
swapping or using an AC-DC adapter.
In this mode use left/right control buttons to move the camera.
Before operating your product, please watch the users manual videos from the link:
manuals.edelkrone.com
SHOW ME WHERE TO START!
2. Use LEFT/RIGHT buttons to move your camera
to the start point position.
EASE IN OUT OPTION
7. Push LEFT/RIGHT buttons to enable/disable ease
in/out option.
% COMPLETE
10.1. While in operation, pushing LEFT/RIGHT buttons
shows the information of percentage completed and
continues as.
HOW LONG ARE WE HERE FOR?
3. Push UP/DOWN buttons to set duration of time
lapse.
DON'T EXCEED SHUTTER SPEED OF
6. Set up your camera's shutter speed according to
value on the screen in order to prevent slide overlaps.
FINAL VIDEO DURATION SO FAR
10.2. The duration of the nal video so far.
PAUSE?
10.5. Pause the process and it will memorize where
it paused.
WHAT SHOULD BE OUR FINAL VIDEO FPS?
4. Push UP/DOWN buttons to set your frame
rate.
WHAT SHUOLD BE OUR FINAL VIDEO DURATION?
5. Push UP/DOWN buttons to set your
nal video duration.
TIME ELAPSED
10.3. Elapsed time so far
TIME REMAINING
10.4. Remaining time to nish.