Mounting Your Action Module To Your Sliderplus - edelkrone ACTION MODULE User Manual

2. MOUNTING YOUR ACTION MODULE TO YOUR SLIDERPLUS

3
2
1
1/ Attach the belt
2/ Place the action module to its position
3/ Place the screws to their positions
Detailed video explaining how to attach this belt and mountaing details can be found *Detailed video explaining how to attach this belt and mountaing details can be found
from : manuals.edelkrone.com from : manuals.edelkrone.com
4
If the action module is going to be
4/
powered by batteries, place the battery
bracket to its position & attach the
screws
3. CAUTIONS & TIPS
During inclined operations, you may need to
assist the slider movement with your hands
by carrying the weight of your equipment.
Action module only assists the momentum
of the movement to smoothen your shot. Do
not take your
hands o your camera for the safety of your
equipment.
Do not slide too fast in order to prevent
skipping on the belt.
Do not attempt to move the slider by hand
except when using wizard mode.
Before operating your product, please watch the users manual videos from the link: *Before operating your product, please watch the users manual videos from the link:
manuals.edelkrone.com manual.edelkrone.com
Do not attempt to operate the slider when
Action is mounted to SliderPLUS even when
the unit is powered o .
When Action is set to recording mode, do
not apply excessive speed to the unit.
Use fully charged batteries or ac-dc adaptor
to get better results.
Do not attempt to disassemble the module.
This will void your warranty.