**Reducer busing (6) is mounted on the 3/8"-16 mounting port (7)
3/8" REDUCER BUSHING & 1/4" POP UP MOUNTING SCREW
HeadONE has 3/8"-16 screw hiddeninside for your tripod head. You can access this screw with the help of a coin. Turn the screw using a coin until it pops out. To hide the screw back in its place, just press it down and turn it counter clockwise.
Dettach the 3/8"-16 Reducer bushing by turning it counter clockwise
MOUNTING (CAMERA-TRIPOD-FLEXTILT HEAD 2)
Attach your HeadONE on your tripod by rotating it clockwise.
Attach your FlexTILT Head 2 on your HeadONE by rotating it clockwise.
Attach your camera on your FlexTILT Head 2 or on your tripod head.
A detailed video explaining the mounting process can be found at: http://edel.kr/ho
USING MOTION BOX WITH FLEXTILT HEAD 2
FlexTILT Head 2 is recommended as a tripod head solution for HeadONE.
With FlexTILT Head 2, you can easily:
Adjust the center of gravity of your setup,
Pan/tilt, and
Change the height of the camera.
A detailed video explaining how to use the FlexTILT Head 2 with HeadONE can be found at: http://edel.kr/ho
START USING
Download the edelkrone App on your mobile device from App Store or Google Play. Links can be found at www.edelkrone.com/headone
There are no on/off buttons on the HeadONE. To switch on, attach the battery to the HeadONE.
edelkrone App will automatically pair with your HeadONE via Bluetooth.
You are now ready to use your HeadONE. Just keep following the instructions on your mobile device or visit manuals.edelkrone.com for a detailed video instruction.
Always start using with a fully charged battery. Make sure your mobile device's Bluetooth connection is on. A detailed video explaining the application usage details can be found at: http://edel.kr/ho
Videos
How to setup a motion time-lapse with edelkrone App Video
edelkrone App - How to pair edelkrone devices Video
Need help?
Do you have a question about the HEADONE and is the answer not in the manual?
Questions and answers