Page 4
3. ASSEMBLY OF BODY PART I B4 & B5 slots must be aligned as shown. M3x8 SCHS A detailed video explaining the assembly process can be found at: http://edel.kr/s3d...
Page 5
4. ASSEMBLY OF BODY PART II M3X12 SHCS A detailed video explaining the assembly process can be found at: http://edel.kr/s3d...
Page 6
5. ASSEMBLY OF WHEELS Bearing x2 Wheel Rings M3x10 FHCS Bearings and wheels are precision parts. * For bearings, please put them into place without forcing and make sure they are shrink fit. * For wheels, install them properly and without twisting.
Page 7
6. ASSEMBLY OF WHEELS M4x16 FHCS Over-tightening may cause damage to the bearings. A detailed video explaining the assembly process can be found at: http://edel.kr/s3d...
Page 8
7. ASSEMBLY OF WHEEL CAPS & SOFT PLATE STICKER Soft Plate Sticker A detailed video explaining the assembly process can be found at: http://edel.kr/s3d...
Page 9
8. MOUNTING FLEXTILT HEAD OR A TRIPOD HEAD Use 3/8” adapter if needed while mounting your camera head to Skater 3D.
Page 10
DISCLAIMER For more information and tips about your Skater 3D, please watch the user’s manual videos at : http://edel.kr/s3d www.edelkrone.com...
Need help?
Do you have a question about the SKATER 3D and is the answer not in the manual?
Questions and answers