Download Print this page

edelkrone FLEXTILT HEAD 2 User Manual

Advertisement

Quick Links

USER'S MANUAL
Before operating your edelkrone,
please watch the user's manual video.

TABLE OF CONTENTS

1.
WHAT'S IN THE BOX & THE BASICS
2.
3.
4.
5.
6.
1. WHAT'S IN THE BOX & THE BASICS
2

Advertisement

loading

Summary of Contents for edelkrone FLEXTILT HEAD 2

  • Page 1: Table Of Contents

    TABLE OF CONTENTS WHAT’S IN THE BOX & THE BASICS MOUNTING YOUR FLEXTILT HEAD 2 MOUNTING THE CAMERA TO YOUR FLEXTILT HEAD 2 ADJUSTING TENSION OF YOUR FLEXTILT HEAD 2 CAUTIONS AND TIPS USE WITHOUT A TRIPOD...
  • Page 2: Mounting Your Flextilt Head

    3. MOUNTING THE CAMERA TO YOUR FLEXTILT HEAD 2 2. MOUNTING YOUR FLEXTILT HEAD 2 Unfold the FlexTILT Head 2 to Attach your camera using access the mounting wheel. the mounting wheel. Place your FlexTILT Head 2 on the screw.
  • Page 3: Adjusting Tension Of Your Flextilt Head

    You can adjust the tension of the system with the help of a 3mm allen wrench (1). Simply tighten or loosen the screws on each side. Panning tension is adjusted using a 2.5mm When you are operating the FlexTILT Head 2 , hold your camera for safety. allen wrench (2).
  • Page 4: Use Without A Tripod

    A detailed video explaining how to balance and turn the camera can be found at: To keep your set up balanced, ensure that the center of gravity is over the middle manuals.edelkrone.com of the self standing area.
  • Page 5 DISCLAIMER edelkrone cannot be held responsible for damage caused by improper use or modification of the product. For more infromation and tips about your FlexTILT Head 2, please watch the user’s manual video at the link, manuals.edelkrone.com © 2016, edelkrone...