Firmware Ver.1.2; Midi In; Enabling/Disabling To Receive Individual Midi Messages - PIONEER DJ TORAIZ SP-16 Operating Instructions Addendum

FIRMWARE Ver.1.2

1.

MIDI IN

A new feature MIDI IN has been added: MIDI messages can be received from an external MIDI device. You
can use sound sources and manipulate various parameters on this unit through the use of external MIDI
hardware including sequences.
Connect a MIDI device to the DIN MIDI terminals
1. Connect the MIDI OUT terminal of an external MIDI device with the MIDI IN terminal of this unit
using a MIDI cable.
2. Tap the [UTILITY] at HOME screen to open the UTILITY screen.
3. Select [DIN MIDI] or [DIN MIDI (THRU H/W)] at MIDI I/F SELECT in the MACHINE SETTING
category.
Connect a MIDI device to the USB terminal
1. Connect your computer with the USB-B terminal of this unit using a USB cable.
2. Tap the [UTILITY] at HOME screen to open the UTILITY screen.
3. Select [USB MIDI] at MIDI I/F SELECT in the MACHINE SETTING category.
1.1.

Enabling/disabling to receive individual MIDI messages

Receiving MIDI messages can be enabled/disabled at [UTILITY] -> [PROJECT SETTING (MIDI IN)] category].
Item
CLOCK
ENABLE : TSP-16 will playback in sync to the tempo of MIDI CLOCK from an external MIDI device.
DISABLE : TSP-16 will not receive MIDI CLOCK from an external MIDI device.
Item
START/STOP/CONTINUE
ENABLE : TSP-16 will receive START/STOP/CONTINUE message from an external MIDI device.
DISABLE : TSP-16 will not receive START/STOP/CONTINUE messages from an external MIDI device.
Item
NOTE/CC
ENABLE : You can use TSP-16 based on NOTE/CC (including Pitch Bend) from an external MIDI device.
DISABLE : TSP-16 will not receive NOTE/CC (including Pitch Bend) messages from an external MIDI
device.
Item
SONG POSITION
Values
ENABLE/DISABLE
Values
ENABLE/DISABLE
Values
ENABLE/DISABLE
Values
ENABLE/DISABLE