Leds; Power; Status; Usb - EXXOTEST USB-MUX-6C6L User Manual

4.7.

LEDs

4.7.1. Power

This LED shows the power supply status of the box
LED status
Off
On (fixed)

4.7.2. Status

This LED shows the working status of the box
LED status
Off
On (fixed)
Flashing (slow = 1 sec)
Flashing (middle = 0.5 sec)
Flashing (quick = 0.1 sec)

4.7.5. USB

This LED shows the working status of the USB link with the PC
LED status
Off
On (fixed)
Flashing
16/05/2012
Document confidentiel appartenant à Annecy Electronique S.A.S.
Ne peut être diffusé, copié intégralement ou en partie sans autorisation expresse préalable
No power supply, or box in extended sleep mode, or box out of
order
Box correctly powered
No power supply, or box out of order, or failure of the
firmware.
If the power supply is delivered by the USB port, it may means
that the USB port power is not sufficient. It is then needed to
power the box using an external power supply.
Failure or absence of the firmware
Shows that the box is powered but not connected to any
computer (USB or Ethernet)
Shows that the box is powered and recognized by a computer
(USB or Ethernet)
Ready to record (DLC mode)
Shows that the box is powered, recognized by a computer (USB
or Ethernet) and that a PC software is linked with it.
Recording (DLC mode)
No more link with the PC, device deactivated or in sleep mode ;
may also indicates a USB failure
Correct link with the PC
Communication with the PC processing
00282805-v2
USB-MUX-6C6L – User guide
Meaning
Meaning
Meaning
14