Installation; Machine Head - SunStar SC-700A User Manual

Sc-700 series
Table of Contents

Advertisement

2

Installation

▶ The machine must be installed by a trained technician only.
▶ Any electrical wiring must be performed by a qualified technician or agent.
▶ The machines weigh over 33 kg. As such, two or more people should carry out the installation.
▶ Plug in only after the installation is complete. If the operator mistakenly steps down on the pedal
▶ Connect the ground (earth) wire.
▶ Place the belt cover on top of the machine.
▶ Use both hands when bending the machine backward or returning it to the normal position.

1) Machine head

※ Insert the head hinge① into the bed holes and fit it to the rubber hinge②. Then stand it on the rubber cushions③ in the
four corners.
▶ Plug in only after oil supply is finished. If the operator mistakenly steps on the pedal with
▶ When handling lubricants, wear protective glasses or gloves to avoid contact with your
▶ Operate the machine only after adding oil when the machine is being used for the first time
10
with the plug in, the machine will start automatically and can cause physical injuries.
An unstable connection may result in an electric shock or a malfunction.
Using only one hand can lead to physical injuries due to the weight of the machine.
the plug in, the machine will start automatically and can cause severe injuries.
eyes or skin. Inflammation may be caused otherwise. Never drink lubricants since they
can cause vomiting or diarrhea. Keep out of the reach of children.
or has been left unused for a long time.
Warning
Caution
[Fig. 1]

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sc-7007sSc-700b-7sSc-700b

Table of Contents