UNO-LRC1 Remote Control of Tuner
Selecting the tuner
To select the XM tuner, push
the source number preassigned to the XM Tuner
(1), or use the UNO numeric source inputs at
the bottom of the UNO-LRC1.
Selecting a Mode
Push
,
or
XM operating modes.
Exiting a Mode
Press
or
to exit XM operating mode
menu.
Signal Strength mode
Press and hold
and release. The display
shows the signal strength rating. To exit press
.
Selecting the desired channel
Use the Channel
and
for manual tuning. To move quickly
through the channels, press and hold the button
for more than 1.5 seconds. To directly select a
channel, enter the one-, two- or three-digit chan-
nel.
Recall Last Channel
Press the
button to recall the last channel
selected.
and choose
to toggle between
or
and
INTERNAL SOURCE - XM TUNER
UNO-LRC1 Remote Control
Selecting a Bank
To select a bank, press and hold
up or
for bank down.
Setting a Memory Preset
To set a memory preset, tune to the desired
channel, then press and hold the appropriate
number key (1-6) for the preset. When the mem-
ory preset is saved, the appropriate preset num-
ber (M1 through M6) and SAVED will be tem-
porarily displayed on the UNO-S2.
Recalling a Memory Preset
Press
and
of all the memory presets for the currently
selected bank. Only configured presets will be
displayed.
Mute
Press the
button to mute/unmute the
tuner audio output.
USER
for bank
to scroll through a loop
23