Table of Contents
Advertisement
INSTALLER
INSTALLATION MENU
b. Selected: Unassigned
(Unasg)
c. Selected: Default
(Deflt)
d. Selected: Macro:
i. MACRO -
(Macro)
ii. MACRO ID –
(MacID)
e.Selected: Delay
(Delay)
f. All Other Selections:
5. DEVICE CODE –
(DevCd)
6. KEY FUNCTION –
(KeyFn)
SYSTEM INFO (SInfo)
System Info allows the installer to view the controller's manufacturing build properties.
See System Info - Flow Chart page 79
#CONTROLLERS (#Ctls)
1. #CONTROLLERS
(#Ctls)
2. BUILD TIME
(BTime)
3. BUILD DATE
(BDate)
4. VERSION
(Ver)
66
Selected command and subsequent commands are cleared.
Procedure advances to COMMAND NUM (step 3)
Default selects the same device type and device code previously
setup in BASIC SETUP. Procedure advances to KEY FUNCTION
(step 6)
A macro can "call" another macro if a sequence of more than 10
commands is needed.
Enter the macro ID number. Menu advances to COMMAND NUM
(step 3)
Enter a 1- to 60-second delay time to postpone delivery of the
next command in the macro. Procedure advances to COMMAND
NUM (step 3)
Procedure advances to DEVICE CODE (step 5)
Source component code for IR control.
Select a function (Play, etc.).
BUILD TIME (BTime)
Displays the number of CAM6.6 controllers in the system.
Displays the Software Build Time of the controller.
Displays the Software Build Date of the controller.
Displays the software version of the CAM6.6.
BUILD DATE (BDate)
VERSION (Ver)
Advertisement
Table of Contents
