Russound CAM6.6X-S1/S2 Instruction Manual page 108

SAMPLE CONFIGURATIONS
MULTIPLE CONTROLLERS WITH TWO TUNERS
System with two CAM6.6X (internal tuner) controllers
The configuration below is suitable for 7-12 zones that
will have access to the tuner in the controller to which
its keypad is connected only. Built-in tuners are always
Source 1 and cannot be changed. If you have more
than one internal tuner, you must set each tuner to its
specific Controller ID number. If you want each con-
troller to have access to dual tuners, a suggested
solution is to use an ST2 Dual Tuner with two CAM6.6s
as shown on the next page.
108
Sunny
Sunny
UNO-S1
CNBC
CNBC
UNO-S1
CAM6.6X (1) -
Controller Setup Menu: Controller ID = 1
Peripheral Setup Menu: Controller ID = 1
CAM6.6X (2) -
Controller Setup Menu: Controller ID = 2
Peripheral Setup Menu: Controller ID = 2
A CAT-5 patch cable is use to connect the RNET Link
Out of Controller 1 to the RNET Link In of Controller 2.
Sunny
UNO-S2
A
NTENNA
CAM6.6 Back Panel (Controller ID 1)
CNBC
UNO-S2
A
NTENNA
CAM6.6 Back Panel (Controller ID 2)
CAM6.6
CAM6.6