Power Control
Auto Power On
PC module power
Max. Power Saving
Standby Control
Network Standby
Power Button
Power on only
" The displayed image may differ depending on the model.
Standby Control
You can set the screen standby mode to be applied when an input signal is received.
Off
•
Auto
Power-saving mode will activate if no input signals are detected even though a source device is connected to
the display.
The message
On
•
Off
On
The message
" If the message,
Off
" If
•
On
Power-saving mode will activate if no input signals are detected.
Network Standby
This feature keeps the network power on when the product turns off.
•
Off
Power Button
The power button on the remote control
•
Power on
•
Power on and
No Signal
will appear if no source device is connected.
No Signal
will appear if no input signals are detected.
"No
Signal" appears even though a source device is connected, check the cable connection.
No Signal Message
is set to Off, the
No Signal
In this case, set
No Signal Message
to On.
/
On
can be set to turn on the power or turn on or off the power.
only: Set the power button on the remote control
off: Set the power button on the remote control
message does not appear.
only to turn on the power.
to turn on or off the power.
92