Troubleshooting - Bissell 2261 SERIES User Manual

Troubleshooting

WARNING
To reduce the risk of electric shock, turn power switch off and disconnect plug from
electrical outlet before performing maintenance or troubleshooting checks.
Problem Possible causes
Vacuum
Power cord not plugged in
cleaner
Blown fuse/tripped breaker
won't run
Dirt container is full
Filter dirty
Hose not secure
Dirt container not in place
Vacuum path clogged
Vacuum
cleaner won't
pick up dirt
Rotating power brush drive
belt broken
Drive belt stretched
Floor brush bristles worn
Floor brush jammed
Cord will not
Power cord is knotted or
retract
twisted
Remedies
Check electrical plug
Check/replace fuse or reset breaker
Empty dirt container
Check, remove debris or clean
Check to be sure hose is snapped into place at
both ends
Make sure dirt container is completely inserted
and snapped into place.
Visually check air passageway, hose inlet, and
hose for anything that might be obstructing the
vacuum path. Carefully remove blockage.
Replace drive belt
Check drive belt area and remove obstructions.
Replace drive belt if necessary
Replace floor brush
Remove floor brush and clean debris from brush
and ends. Check drive belt for any damage
Follow instructions on page 6
www.BISSELL.com.au
11