Setup Wizard (Advanced System Configuration) - Pentair INTELLICENTER Quick Reference Manual

Setup Wizard [Advanced System Configuration] - Outdoor Control Panel Only
Initial System Power Up: After all required pool/spa equipment has been connected to the IntelliCenter Control System, apply power to the system at the main panel circuit breaker. Upon the
initial system power up, the outdoor LCD control panel will display the PENTAIR END USER LICENSE AGREEMENT. Please read this agreement. To continue, tap the Down arrow on the right side of
the screen to scroll down to the end of the agreement and tap I Accept to accept the agreement. The Home screen is then displayed. Note: Initial system Power up: The Pentair End User License
Agreement is displayed only one time after the initial system power up.
Wizard Setup: To start the Wizard system setup, from the Home screen, tap Settings > Advanced System Configuration > Wizard.
IntelliCenter Control System Setup: The first Setup Wizard configuration screen, Displays the current system firmware version.
IntelliCenter Control System Setup Wizard: The first Setup Wizard configuration screen, Displays the current system firmware version. Help/Menu: Tap to display the Help text. Tap hold and release
to display the Wizard MAIN MENU options. Exit Wizard: Tap this button to exit the Setup Wizard and return to the Home screen. Next: Tap Next to continue with the Setup Wizard and display the
Detected Hardware screen.
Import System Configuration: Yes: Use this option to Import a system configuration file (.CFG) from a USB device plugged into the USB Port on the front of the IntelliCenter Control System Outdoor
control panel. Note: This option will overwrite the current system configuration. No: Tap No then Next to continue with the Setup Wizard.
Import for USB: Insert a USB device into the USB Port on the Outdoor or Indoor control panel. Tap Import from USB and navigate to the system configuration file (.CFG). Follow the on screen
instructions to import the system configuration files plugged into the USB Port on the Outdoor or Indoor control panel. Local or copy from Remote: These options will overwrite the system
Detected Hardware: Displays the installed IntelliCenter Control System Personality main circuit board and Expansion Cards (if applicable).
Next: Tap Next to continue to the Zip Code/Location settings screen. Back/Home: Tap Back to go to the previous screen. Exit Wizard: Tap to exit the Setup Wizard and display the Exit Wizard screen
(No, Yes, Discard options). Update date & Time: Tap Yes and Next to update the system date and time. Clock Mode: Select either 12 hour or 24 hour mode. Time Set: Tap the Time Set time bar and set
the current time for your location. Tap Check to save and return to the previous page. Date Set: Tap the Date Set time bar and set the current date. Tap Check to save and return to the previous page.
Offset (min/month: Select ON to offset the current time (minutes) and month. Daylight Saving Time: Select ON to automatically set the yearly daylight saving time for your location. Select NO to
manually change the daylight savings time for your location. Converting a 12 hr. time to 24 hr. (military time) is from 1:00 PM to 11:59 PM, then add 12 hours, and from 12:00 AM (midnight) to 12:59 AM
subtract 12 hours. What is your Zip Code / Location: After the IntelliCenter Control System has verified the login information successfully, the Location screen is displayed. If needed, tap Zip Code,
Latitude/Longitude or Time Zone and enter the updated information. Note: If the PC time and date do not match the time and date displayed on the Home screen, you need to reset the PC time and date to the
time and date set
Wizard Navigation: Help: Tap this button to display brief informative information for the current screen. Menu: Tap hold and release to display the Wizard Setup Main Menu items. From this screen you
can select which item to configure during the Wizard setup.
Help Screen/Main Menu Button: From any of the Wizard Setup screens, tap Help to display the help text. Tap the Main Menu button to display the Wizard Main Menu items.
Main Menu: Tap the Main Menu button on the Help text screen to display the Main Menu items. Also, tap and hold and release the Help/Main Menu button on any of the Wizard Setup screens to display
the Main Menu items. Start Page: Return to the first Wizard "Welcome" screen. Exit Wizard: Display the Exit Wizard screen options. Back: Return to the previous screen. Summary Page: Go to the
Summary screen. For more Set Wizard information, see the IntelliCenter Control System User's Guide (P/N 522990).
IntelliCenter Control System Quick Reference Guide
18