Pentair INTELLICENTER Quick Reference Manual page 8

Lights (Groups)
From the Lights > Groups screen you can manually turn on or off a selected groups of lights. Light Groups displayed in the Lights screen are configured from the Settings > Advanced
System Configuration > Installation Setup > Circuits > AUX Circuits screen. To add a group of lights, tap the Four Dots icon to display the Groups screen.
Light Groups
Individual Groups
Lights Group 1
Lanscape LT Grp
All Lights OFF
Waterfall LT Grp
Light Groups: Tap the Edit Pencil icon to display the Light Settings screen. Tap Light in Group or Group Settings to change the light Fixed Color and Light Shows in a selected group of lights.
Lights In Group: This screen displays the light colors in the light group. Change a Fixed Color: Tap on a light color button type to display the available fixed colors to choose from.
Tap Check to view the changed fixed color.
Light Settings
Individual Groups Settings
Fixed Color
Lighting Mode
ON
All Lights Same Color
Group Name All Yard Lights
Included Lights 3
0hr. 0min.
Egg Timer
Color Settings
Sync: Tap this momentary button to synchronize (Green light on) all IntelliBrite lights in the group. The Light in the group will go to the beginning of the SAm rotation. After 21 seconds
the lights will start rotating eaach time the button is tapped.
Swim (Color Swim): Tap this momentary button to activate (Green light on) an effect of moving colors across the pool. From the Swim Settings Delays screen set a delay between the
lights so that the first light syncs and starts rotating, then the second light starts rotating after that, and the third light rotates after that with a delay between the lights.
Color Set: Tap this momentary button to activate (Green light on) to set the default color for each light then stop the light on one of the selected 8 colors. To change the light color or
the light delay (from 0 to 60): Tap Settings > Groups. Select the group of lights to change. Tap Color Settings. Set the delays between the lights from 0 to 60 sec.
Light Settings
Light Shows
Lights in Group Groups Settings
White
IntelliBrite GlowBrite
Blue
ColorCascade Lighting Group 1
Red
All Lights
Group Settings: Lighting Mode Fixed Color:
Tap the All Lights Same Color ON/OFF button.
ON: All lights in the group are set to the same
color. OFF: Each individual fixed color light can
display a different color.
Select Circuit to Edit
Delay 0s
Beach Light
White
Delay 15s
Back Yard Light
Light Green
Delay 25s
Pool Light
Green
Delay 35s
Pool Light 2
Cyan
Delay 55s
Spa Light
Blue
Pool Light Color
Colors
Green
Magenta
Select Light Mode Select Display Type
Fixed Color Fixed Color
Light Show Light Show
The Light Groups Sync, Swim and Set
SAm feature are configured from
Settings > Groups.
7
Change a Fixed Colors to a Light Show: Tap the Groups
Settings button, Tap the Lighting Mode button (Fixed Color)
and select Light Show. Select one of the Light Shows. Tap
the Check to return to the Light Settings screen.
Edit (Pencil): Display the Light Settings screen.
Lights in Groups: Displays the light circuit name and color. Note:
All light will display the same color if All Light Same Color is
enabled (ON) from the Group Settings screen. To display different fixed colors
for each light, select All Light Same Color (OFF).
IntelliCenter Control System Quick Reference Guide