Pumps - Pentair INTELLICENTER Quick Reference Manual

Pumps

+ Add Pump: To configure a new pump, tap + Add Pump to access the Select New Pump Type
screen to setup the pump settings. Pump types are: Single Speed, Dual Speed, IntelliFlo VS,
IntelliFlo VSF, and IntelliFlo VF.
Single Speed Pump Settings: From the Single Speed Pump Settings screen you can change the
pump type, name and assign the pump to a body of water (pool, spa, or pool/spa.
Dual Speed Pump Settings: Pump Type, Pump Name, Body, and High/Low Speed Circuits. For information about priming the pump.
Pump Type: To change the pump type, tap Pump Type button to access the pump type screen. Select the pump for the list. Tap Check to save the new pump type and return to the previous
screen.
Pump Name: Tap the Pump Name button and enter the name of the pump. Tap Check to save the name and return to the previous screen.
Body: Assign the pump to a body of water (pool, spa, or pool/spa (shared equipment).
High Speed Circuits: Select a circuit for the high speed. You can choose up to eight (8) high speed circuits. Tap the High Speed Circuits button. Tap Add Circuit and select an AUX circuit to
assign the high speed to. Tap Check to save the circuit and return to the previous screen.
IntelliFlo VS Settings: Pump Type, Name, Address (1-16), Min. Speed (450 RPM), Max. Speed (3450 RPM), Step Size (10-250 RPM), Prime Time (0-5 min.), and Prime Speed (450-3450 RPM).
Speed Circuits: Assign the speeds to the circuits you wish to use. Tap Speed Circuits and tap Add Circuits to assign a new AUX circuit. To change the pump speed of a listed circuits, tap the
AUX name to change the assigned RPM setting. Tap Return to save the setting and return to the previous screen. Affiliated Circuit Settings: Circuit: The assign circuit to control the pump
speed. Speed (RPM): Assign pump speed from 450 to 3450 for the selected circuit. Pump Status: Shows the current power usage in Watts, speed, in revolutions per minute (RPM) while the
pump is operating. Tap Return to return to the previous screen. Also see: Tap Status on the Home screen to display the current pump status and error condition.
IntelliFlo VSF Settings: Pump Type, Name, Address (1-16), Min. Speed (450 RPM), Max. Speed (3450 RPM), Min. Flow (20 GPM), Max. Flow (140 GPM), Step Size (10-250 RPM), and Step Size
(1-10 GPM). Speed Circuits: Assign the speeds to the circuits you wish to use. Tap Speed Circuits and tap Add Circuits to assign a new AUX circuit. To change the pump speed, tap the AUX name
to change the assigned RPM setting. Tap Return to save the setting and return to the previous screen. Affiliated Circuit Settings: Circuit: The assign circuit to control the pump speed.
Flow (GPM): Assign pump flow rate from 20-140 for the selected circuit. Speed (RPM): Assign pump speed from 450 to 3450 for the selected circuit. Pump Status: Shows the current power
usage in Watts, flow rate in gallons per minute (GPM) or revolutions per minute (RPM) while the pump is operating. Tap Return to return to the previous screen.
IntelliFlo VF Settings: Pump Type, Pump Name, Pump Address (1-16), Min. Flow (15 GPM), Max. Flow (134 GPM), and Step Size (1-10 GPM).
Speed Circuits: Assign the speeds to the circuits you wish to use. Tap Speed Circuits and tap Add Circuits to assign a new AUX circuit. To change the pump speed of a listed circuits, tap the
AUX name to change the assigned RPM setting. Tap Return to save the setting and return to the previous screen.
Affiliated Circuit Settings: Circuit: The assign circuit to control the pump speed. Flow (GPM): Assign pump flow rate from 0 to 134 for the selected circuit.
Pump Status: Shows the current power usage in Watts, and flow rate in gallons per minute (GPM) while the pump is operating. Tap Return to save the setting and return to the previous
screen.
Pumps (9 of 16)
Add Pump
Filter Pump 1
Type: Single Speed
Filter Pump 2
Type: IntelliFlo VF
Filter Pump 3
Type: Intelliflo VS
Filter Pump 4
Type: Two Speed
11
Select New Pump Type
Single Speed
Dual Speed
IntellliFlo VS
IntelliFlo VSF
IntelliFlo VF
IntelliCenter Control System Quick Reference Guide