Security )Passcode); Pentair User Portal (Ww.intellicenter.com) - Pentair INTELLICENTER Quick Reference Manual

Security (Passcode)
Note: Only an the Administrator can access the Security screen.
Enable Security: Tap the Enable Security bar to access the Super Administrator's Security Settings. The Enable Security setting is ON to allow you to enter the Super Administrator's Passcode.
From this screen the Administrator can enable or disable Guest Account to assign a passcode, and turn off and on the main system security. Note: If the incorrect Passcode is entered multiple
times, the Access Denied screen is displayed. This screen will time out for 60 seconds. After 60 seconds has elapsed, tap OK to enter the correct Passcode.
Security: This screen shows the Administrator has been assigned a passcode and is logged and has access to all of the system (All Sections). Also shown is a Guest Account who has been
assigned a passcode and how many sections have been allow access to (8/24 Sections). 0/24 Sections indicates no access to system sections.
Administrator Log out: Tap Administrator to enable or disable the system security. To log out the Administrator, tap Yes.
User List: Tap a name to display the User Security Settings screen: Change the user name, passcode, access to sections and timeout setting.
Add New User: Tap Add New User to enter the new user's name and select up to four (4) sections that the user has access to. Up to 10 users can be assigned access to the Sections. Tap Check
to save the name and return to the previous screen. Note: Tap Guest to access the Guest Security Settings screen to allow the Guest to access 0 to 24 system settings. A Guest does not require a
Passcode.
Passcode: Tap Unassigned and enter the 4 digit system Super Administrator's Passcode. Tap Check to save the passcode. Tap X to exit without saving passcode return to the previous screen.
Timeout (min): Tap plus or minus to set the screen elapse time (1-10 minutes) before screen message is displayed for the passcode. A padlock icon is displayed on the Home screen indicates that
there is an Administrator's passcode assigned.
Deselect All: Tap Deselect to deselect all of the system functions selections in the list.
Select All: Tap select All to select all of the system functions listed, or tap individual selections. Tap Check to save selections. Tap X to exit without saving changes.
Pentair User Portal (www.intellicenter.com) (Settings)
Web and Mobile Interface: Tap to access the Web and Mobile Interface scree. The default setting for Web Interface is OFF. This enables the Web based and mobile interface which allows local
network and Internet communications with the IntelliCenter™ Control System. To disable Web based and mobile interface, set to OFF. Note: For the IntelliCenter Control System to connect to the
Web requires connection of the Wireless Bridge Transceiver Antenna to the Outdoor main circuit board. For installation instructions, see the IntelliCenter Control System Installation and User's
Guide.
Add New Account: Enter the owner's information, Email address, Property Name, Password. The system will attempt to create to the owner's account email address to www.intellicenter.com.
Login to Existing Account (www.intellicenter.com): Enter email address and password. The system will attempt to connect to the owner's account via the Internet connection.
Update Owner Information: Edit owner information: Property Name, Name of owner, Address, City, State, Zip Code, County, Time Zone, Phone number, E-Mail. Location information is populated
when entered in General > Location > Date & Time.
View Connection Information: View server connection information: Last messages received, total number of server connects.
IntelliCenter Control System Quick Reference Guide
16