Casio 5536 Operation Manual page 4

Remaining Charge and Dead Battery
●
You can determine if the charge level is low by
checking the hand movement. Functions
become disabled as battery power goes low.
Important!
Should the battery go low or go dead,
●
expose the face (solar panel) to light as
soon as possible.
Note
Exposing the watch face to light after
●
the battery goes dead will cause the
[CHARGE] indicator to appear and the
second hand to rotate
counterclockwise until it stops at
second 57. This indicates charging
has started.
Low Battery Power
The second hand jumps at two-second
intervals.
Second hand
Dead Battery
All hands are stopped.
Operation Guide 5536
Charging Time Guidelines
●
The table below shows guidelines for
approximate charging times.
Required Charging Time for 1-day Use
Light Level (Lux)
50,000
10,000
5,000
500
Time Required to Achieve Next Charge
Level
Sunny day, outdoors (50,000 lux)
●
Dead battery n Medium
charge
Medium charge n High
charge
High charge n Full charge
Sunny day, near a window (10,000 lux)
●
Dead battery n Medium
charge
Medium charge n High
charge
High charge n Full charge
Overcast day, near a window (5,000 lux)
●
Dead battery n Medium
charge
Medium charge n High
charge
High charge n Full charge
Indoor fluorescent lighting (500 lux)
●
Dead battery n Medium
charge
Medium charge n High
charge
High charge n Full charge
Note
Actual charging time depends on the
●
local charging environment.
Power Saving Function
●
Leaving the watch in a dark location for about
one hour between the hours of 10 p.m. and 6
a.m. will cause the display to go blank, and the
watch to enter Level 1 power saving. If the
watch is left in this condition for six or seven
Approximate
days, the watch will enter Level 2 power
Charging Time
saving.
8 minutes
30 minutes
Power Saving Level 1 :
48 minutes
The second hand stops at 12 o'clock and the
8 hours
digital display goes blank to save power. The
watch can connect with a phone at this level.
Power Saving Level 2 :
All hands stop and the digital display goes
blank to save power. All functions are
2 hours
disabled.
Recovering from Power Saving Operation
20 hours
Use one of the operations below to exit power
6 hours
saving.
Press any button.
●
Move the watch to a bright location.
●
Trigger auto light by angling the watch
●
6 hours
towards your face.
73 hours
Note
20 hours
●
9 hours
●
119 hours
32 hours
l
●
113 hours
-
-
The watch will not enter power saving
in the cases below.
Alarm Mode
ー
While in the Stopwatch Mode
ー
While in the Timer Mode
ー
You can enable or disable Power
Saving.
Configuring Power Saving Function
Settings
Note that the watch also may enter
power saving if its face is blocked from
light by your sleeve while you are
wearing it.
4