Stopwatch
The stopwatch measures elapsed time in
1/1000-second units for the first hour, and in
1/10-second units after that for up to 24 hours.
Getting ready
Enter the Stopwatch Mode.
Navigating Between Modes
l
Measuring Elapsed Time
1.
Use the operations below to measure
elapsed time.
D
Start
D
Stop
D
Resume
D
Stop
Elapsed time is shown in 1/1000-
●
second units for the first hour of the
measurement. After the first hour,
elapsed time is shown in 1/10-second
units.
First hour
After first hour
Minutes, seconds,
Hours, minutes, seconds,
1/1000 seconds
1/10 seconds
2.
Press (E) to reset the elapsed time to all
zeros.
Operation Guide 5536
Measuring a Split Time
1.
Use the operations below to measure
elapsed time.
Pressing (E) causes the elapsed time
●
up to that point (split time) to be
indicated.
Elapsed time is shown in 1/1000-
●
second units for the first hour of the
measurement. After the first hour,
elapsed time is shown in 1/10-second
units.
First hour
Minutes, seconds,
1/1000 seconds
2.
Press (E) to reset the elapsed time to all
zeros.
D
Start
E
Split
E
Split release
D
Stop
After first hour
Hours, minutes, seconds,
1/10 seconds
Timing the First and Second
Place Finishers
1.
Use the operations below to measure
elapsed time.
D
Start
E
1st Finisher*
D
2nd Finisher*
* Displays the time of the first finisher.
Elapsed time is shown in 1/1000-
●
second units for the first hour of the
measurement. After the first hour,
elapsed time is shown in 1/10-second
units.
First hour
After first hour
Minutes, seconds,
Hours, minutes, seconds,
1/1000 seconds
1/10 seconds
2.
Press (E) to display the time of the second
finisher.
3.
Press (E) to reset the elapsed time to all
zeros.
Timer
The timer counts down from a start time
specified by you. A beeper sounds when the
end of the countdown is reached.
The beeper is muted in the cases described
●
below.
When battery power is low
ー
Getting Ready
Enter the Timer Mode.
Navigating Between Modes
l
10