Connecting With A Phone; Using Mobile Link With A Mobile Phone; Connection; Disconnecting From A Phone - Casio 5536 Operation Manual

Connecting with a Phone

To connect the watch with a phone, first install
the CASIO "G-SHOCK Connected" app on the
phone and then use Bluetooth to pair the
watch with the phone.
●
A Install the app on your phone.
Depending on your phone type, tap one of the
links below to install G-SHOCK Connected.
iOS (iPhone) Users
https://itunes.apple.com/us/app/g-shock-
connected/id1179983841?mt=8
Android TM (GALAXY, etc.) Users
https://play.google.com/store/apps/details?
id=com.casio.gshockconnected
● B Configure Bluetooth settings.
Enable the phone's Bluetooth.
Note
For details about setting procedures,
●
see your phone documentation.
● C Pair the watch with a phone.
Before you can use the watch in combination
with a phone, you first need to pair them.
1.
Move the phone to be paired with close to
(within one meter of) the watch.
2.
On the phone's Home Screen, tap the "G-
SHOCK Connected" icon.
3.
Follow the instructions on the phone's
screen to pair with the watch.
If a pairing prompt message appears,
●
perform the operation shown on the
phone screen.
If pairing fails for some reason, [ERR]
●
will appear on the display momentarily
and then the watch will return to the
mode it was in before you started the
pairing procedure. Perform the pairing
procedure again from the beginning.
Pairing started. Pairing complete.
Operation Guide 5536
Using Mobile Link with
a Mobile Phone
While there is a Bluetooth connection
between the watch and phone, the watch time
setting is adjusted automatically. You can also
change the watch's other settings.
Note
This function is available only while G-
●
SHOCK Connected is running on the
phone.
This section describes watch and
●
phone operations.
X : Watch operation
Y : Phone operation

Connection

Connecting with a Phone
This section explains how to establish a
Bluetooth connection with a phone that is
paired with the watch.
If the watch is not paired with the phone you
●
want to connect with, refer to the information
below and pair them.
C Pair the watch with a phone.
l
1.
Move the phone close to (within one meter
of) the watch.
2.
X Hold down (B) for at least 1.5 seconds
until [CONNECT] starts to flash.
When a connection is established
between the watch and phone,
[CONNECT] will stop flashing and the
second hand will move from [R] to e .
If connection fails for some reason,
●
[ERR] will appear on the display
momentarily and then the watch will
return to the mode it was in before you
started the connection procedure.
Trying to connect
Important!
If you have problems establishing a
●
connection, it could mean that G-
SHOCK Connected is not running on
the phone. On the phone's home
screen, tap the "G-SHOCK
Connected" icon. After the app starts
up, hold down the watch's (B) button
for at least 1.5 seconds.
Note
The connection will be terminated if
●
you do not perform any operation on
the watch or phone for a fixed amount
of time.
To specify the connection limit time,
perform the following operation with G-
SHOCK Connected: "Watch
settings" n "Connection time". Next,
select a setting of 3 minutes, 5 minutes,
or 10 minutes.

Disconnecting from a Phone

Pressing any button will terminate a Bluetooth
connection and return to the Timekeeping
Mode.
Connected
Connected
Disconnected
5