Using The Watch In A Medical Facility Or Aircraft; Unpairing; If You Purchase Another Phone; Auto Time Adjustment - Casio 5536 Operation Manual

Using the Watch in a Medical Facility
or Aircraft
Whenever you are in a hospital, on an aircraft,
or in any other location where auto signal
receive or connection with a phone may cause
problems, you can perform the procedure
below to disable it. To re-enable auto time
adjustment, perform the same operation
again.
1.
X If the watch is in any mode besides the
Timekeeping Mode, hold down (C) for at
least two seconds to enter the
Timekeeping Mode.
2.
X Hold down (A) for at least two seconds
until the name of the currently selected
Home City is displayed.
3.
X Press (C) 14 times.
This displays [RCV].
4.
X Press (D) to select the auto time
adjustment setting you want.
[OFF]: Auto time adjustment disabled.
[ON]: Auto time adjustment enabled.
5.
X Press (A) to exit the setting screen.
Note
The auto time adjustment setting can
●
be changed only while the watch is
paired with a phone.
Operation Guide 5536

Unpairing

1.
X If the watch is connected with a phone,
press any button to terminate the
connection.
Connected
2.
Y Tap the "G-SHOCK Connected" icon.
3.
Y Perform the operation shown on the
phone screen to unpair.

If you purchase another phone

You need to perform the pairing operation
whenever you want to establish a Bluetooth
connection with a phone for the first time.
C Pair the watch with a phone.
l

Auto Time Adjustment

Your watch will connect with a phone at preset
times each day and adjust its time settings
automatically.
Using Auto Adjust
●
Your watch adjusts its time setting four times
a day according to a preset schedule. If you
leave your watch in the Timekeeping Mode, it
will perform the adjustment operation
automatically as you go about your daily life,
without any operation required by you.
Important!
The watch may not be able to perform
●
auto time adjustment under the
conditions described below.
While the watch is too far away from
ー
its paired phone
While communication is not possible
ー
due to radio interference, etc.
While the phone is updating its
ー
system
Note
If the watch does not indicate the
●
correct time even if is able to connect
with a phone, correct the hand and
date indicator positions.
Adjusting Hand Alignment
Disconnected
l
If there is a World Time City specified
●
with G-SHOCK Connected, its time will
also be adjusted automatically.
The watch will connect with the phone
●
and perform auto time adjustment at
around 12:30 a.m., 6:30 a.m., 12:30
p.m. and 6:30 p.m. The connection is
automatically terminated after auto
time adjustment is complete.
The watch cannot connect with a
●
phone for time adjustment while a
stopwatch measurement or timer
operation is in progress.
Triggering Immediate Time Adjustment
●
The watch's time setting will be adjusted
automatically whenever you establish a
connection between the watch and a phone.
Whenever you want to adjust the watch's time
setting based on your phone's time, perform
the procedure below to connect with a phone.
1.
Move the phone close to (within one meter
of) the watch.
2.
X Press (B).
[SET] flashes to indicate that the watch
has started the connection operation.
Once the watch and phone are
connected, [OK] will appear, and then the
watch will adjust its time setting based on
information from the phone.
Trying to connect
Note
You can perform the above operation
●
for time adjustment from any watch
mode.
The connection is terminated
●
automatically after time adjustment is
complete.
If time adjustment fails for some
●
reason, [ERR] will appear.
Following time
adjustment
6