Wheel Plate - Fiat TALENTO Owner's Handbook Manual

258
To extract the spare wheel B fig. 259:
with tool A fig. 258 completely undo
nut 5 fig. 259 (right side) and partially
undo nut 3 fig. 259 (left side) in order to
free the basket 4 fig. 259 from nut 3;
free the spare wheel.
Depending on the version, there is
documentation with the instructions
described above in the tool box.
To put spare tyre B fig. 259 back in
place, proceed in the reverse order.
Check that bracket 4 is positioned
correctly before tightening nuts 3 and 5
fig. 259.
156
259
T36688
IMPORTANT In some cases (rear wheel
puncture, vehicle loaded with tow
system) you may need to lift the vehicle
up (from the closest lifting point to the
tyre concerned) to be able to access
the spare tyre.

Wheel plate

Remove wheel plate 9 using wrench 5
fig. 260, inserting the hook in one of the
plate's outside openings.
To refit the plate, position it with respect
to valve 10 fig. 260.
Insert the retaining hooks starting from
the side of valve A, then B and C,
ending with the side opposite valve D
fig. 260.
260
T36689
Remove wheel plate 11 fig. 261 with
wrench 5 by inserting the hook in the its
peripheral opening.
To refit it, position the five wheel plate
fasteners corresponding to the 5 fixing
screws fig. 261 and press hard on the
centre of the wheel plate to hook it to
the wheel.
261
T36693
T36694