Setting The Speed; Changing The Speed; Exceeding The Speed Limit; Impossibility To Maintain Speed - Fiat TALENTO Owner's Handbook Manual

151
1 fig. 150 General switch ON/Off.
2 fig. 151 Activate, store and
increase speed regulator (+).
3 fig. 151 Lower speed regulator (-).
4 fig. 151 Activate with stored speed
regulator recall (R).
5 fig. 151 Put the function in standby
(with stored speed regulation) (O).
Activation
Press the switch 1 fig. 150 side
152
70
Green warning light 6 fig. 152 turns on
and the appropriate message appears
on the instrument panel along with
dashes to indicate that the function is
active and waiting for the speed limit
recording.

Setting the speed

At constant speed (over about
30 km/h), press button 2 fig. 151 (+):
the function is activated and the current
speed is stored.
T36544
The speed replaces the dashes and is
confirmed when a green light 6
fig. 152 appears after light 7 fig. 152.
Guide
After storing the regulation speed and
activating regulation, you can take your
foot off the accelerator.
79) 80)

Changing the speed

You can vary the speed regulator by
.
pressing in succession:
button 2 fig. 153 to increase the
speed.
button 3 fig. 153 to decrease the
speed.
T36504-3
153

Exceeding the speed limit

At any time you can raise the speed by
pressing the accelerator pedal. When
the speed is higher than that set, the
speed indicator will flash on the
instrument panel.
Then release the accelerator pedal:
after a few seconds, the vehicle will
automatically return to the initial speed
set.

Impossibility to maintain speed

In the event of a steep slope, the speed
cannot be respected by the system: the
stored speed will flash on the
instrument panel to inform you of this.
Placing the function in stand-by
The function can be suspended:
by pressing button 5 (O) fig. 154;
by using the brake pedal;
by using the clutch pedal.
T36544-1