Fiat TALENTO Owner's Handbook Manual page 80

To go back to the preceding mode,
repeat the same operation.
NOTE After disconnecting the battery,
the on-board computer automatically
returns to the original unit of measure.
Time and outside temperature
Display A (depending on the vehicle
version) fig. 166
166
In order to access display A about
setting the time, press button 2 or 3
fig. 168 and wait few seconds.
78
167
The hours and minutes will flash, now
you can adjust them with a long press
on button 2 or 3 fig. 168 to adjust the
hour. As soon as the hours flash, press
button 2 or 3 fig. 168 briefly or for a
long time to adjust the hour.
T36518-1
168
Afterwards, press button 2 or 3
fig. 168 for a long time to confirm the
hour set.
The minutes flash: press button 2 or 3
fig. 168 briefly or for a long time to
adjust them.
After adjusting them, the hours and
minutes will show for 2 seconds without
flashing: they are now set.
IMPORTANT If the power supply is
disconnected (battery disconnected,
power line cut, etc.) you must set the
clock again. We advise you not do this
while driving.
TIMAGE-1
Display
(For versions/markets where provided)
169
Only in vehicles equipped with a
multi-media display B fig. 169,
navigation system, telephone, etc.
T35570-5
Refer to the RADIO / TOUCH-RADIO
NAV supplement
T36519