Motion Control - Yamaha MONTAGE 6 Supplementary Manual

Motion Control

Motion Control
Overview
[PERFORMANCE]  [Motion Control]  [Overview] or [SHIFT] + [PERFORMANCE]
Operation
Control Function
Switches among Performance Control, Part Control, and Element/Operator Control.
Settings: Performance Control, Part Control, Elem/Op Control
NOTE You can now store Control function operations as Performance data.
NOTE Element/Operator Control can also be selected by simultaneously holding down the [SHIFT] button and using the [PART CONTROL]
buttons.
 When "Element/Operator Control" is selected
The Number A [1] – [16], Number B [1] – [8], and the Number C [1] – [8] buttons function the same as when "Part Control" is
selected.
Number buttons
Number A [1] – [8] buttons
(upper line)
Number A [9] – [16] buttons
(lower line)
Number B [1] – [8] buttons
Number C [1] – [8] buttons
When "Element/Operator Control" is selected and the PART [COMMON] button is ON, the Control Sliders 1 – 8 control the levels
of the Elements/Operators of Part 1.
NOTE Element/Operator Control is useful for playing Performances, for example, that contain single Organ Parts, because controlling the
volume of Elements in the Live Set display changes the harmonics of the Organ sound, just as with an actual organ.
MONTAGE Supplementary Manual
PART [MUTE] button and
PART [SOLO] button are OFF
Part select (1 – 8)
Part select (9 – 16)
Motion Sequencer for each Part ON/OFF (1 – 8 / 9 – 16)
Arpeggio for each Part ON/OFF (1 – 8 / 9 – 16)
Control Function
PART [MUTE] button ON
Part mute (1 – 8)
Part mute (9 – 16)
PART [SOLO] button ON
Part select (1 – 8)
Part solo (9 – 16)
41