Utility - Yamaha MONTAGE 6 Supplementary Manual

Utility

Settings
Audio I/O
You can now control the monitor volume of the Audio signal input from the [USB TO HOST] terminal.
[UTILITY]  [Settings]  [Audio I/O]
Operation
USB Volume (USB Input Volume)
Adjusts the volume of the Audio signal input from the [USB TO HOST] terminal. This setting is applied to the output gain of the
OUTPUT (BALANCED) [L/MONO]/[R] jacks and the ASSIGNABLE OUTPUT (BALANCED) [L]/[R] jacks.
Settings: 0 – 127
USB Input Volume is stored as part of the general system settings, not as Performance data.
NOTE
MONTAGE Supplementary Manual
USB Input Volume
32