Utility - Yamaha MONTAGE 6 Supplementary Manual

Utility

Settings
MIDI I/O
You can now control the Super Knob by MIDI Control Change messages.
[UTILITY]  [Settings]  [MIDI I/O]
Operation
Super Knob CC (Super Knob Control Change Number)
Determines the Control Change number generated by using the Super Knob. Even when the instrument receives MIDI
messages with the same Control Change Number specified here from the external equipment, the instrument assumes that the
message is generated by using the Super Knob. When "MIDI I/O Mode" is set to "Multi," Channel 1 is used for transmitting MIDI
data. When "MIDI I/O Mode" is set to "Single," the channel specified in "MIDI I/O Ch." is used for transmitting MIDI data.
Settings:
Off, 1 – 95
NOTE When this parameter is set to off, MIDI data is transmitted by SysEx (System Exclusive) messages.
Control Number
Calls up the Control Number display in the Common/Audio Edit.
MONTAGE Supplementary Manual
Super Knob CC (Super Knob Control Change Number)
Control Number
45