Procedure For Replacing The Battery - Omron BU100RS Instruction Manual

4 Replacing the battery
4-2 Replacing the battery

4-2-2 Procedure for replacing the battery

For cautions when replacing the battery of the UPS, refer to "Caution for battery
replacement)" shown in the "Safety precautions" of the beginning of this manual.
1.
Use a hex wrench included with the optional battery pack or hex screwdriver (across
flats width 3) to loosen (turn counterclockwise) the 2 screws at the top of the front panel
of the unit. (1
Pull the right side of the front panel towards you to remove it. (2
66
2
Pull the right side
towards you to remove
1
Loosen the 2 screws
with hex screwdriver
or wrench
BU100RS