Display And Beep For Battery Replacement - Omron BU100RS Instruction Manual

3 Check and start operation
3-4 Interpreting beeps and displays
(2) When "Power" switch is "OFF"
Status
No.
indicator
34
35
36

3-4-5 Display and beep for battery replacement

37
38
39
54
Power Battery
Battery
supply replace
mode Beep
output ment
LED
LED LED
Continuous
Continuous
Continuous
Intermittent
2.0-second
intervals
Intermittent
2-second
intervals
--- --- ---
None
Charging Description
Failure occurred. When
the "Buzzer
OFF Pause/Test" switch is
pressed, the details of
the error are displayed.
Stopped charging due
OFF to abnormal rise in
battery charge voltage.
Stopped charging due
OFF to abnormal drop in
battery charge voltage.
The self-diagnosis test
detected a weak battery
ON
(warning only, output
continues).
Battery life counter went
ON off-scale. (Warning only.
Outputs continue.)
Battery life counter has
OFF
been reset.
Solution
There is a problem with
the unit. Contact the
shop of purchase or the
OMRON Electronic
Systems & Equipments
Customer Support
Center.
Turn off AC input.
(Same as above.)
Replace the battery.
You can replace the
weak battery with a
separately purchased
replacement battery as
needed.
See also "4-2 Replacing
the battery".
Be sure to reset the
battery life counter after
replacing the battery.
See also "4-2 Replacing
the battery".
BU100RS