Table of Contents
Advertisement
2.4. LED indicator
.4. LED indicator
The LED shows the present status of the network and error.
LED
Color/ state
OFF
Flashing Green/Yellow
2.1
Green ON
"Port R"
Yellow ON
Green BLINK
Yellow BLINK
OFF
Flashing Green/Yellow
2.2
Green ON
"Port L"
Yellow ON
Green BLINK
Yellow BLINK
OFF
Flashing Green/Red
2.3
Green ON
"Link"
Green flashing 3 times
Green flashing 4 times
Green flashing 5 times
OFF
Flashing Green/Red
Green ON
2.4
Green flashing
"NS"
Red flashing
Red ON
OFF
Flashing Green/Red
2.5
Green ON
"MS"
Green flashing
Red flashing
Red ON
(*1) In case of duplicate IP Address, the LED2.3.is green flashing 4times, LED2.4 and 2.5 are solid red.
Port R
Port L
Link
NS
MS
No Link
Power Up testing
Link at 100 Mbps
Link at 10 Mbps
Activity at 100 Mbps
Activity at 10 Mbps
No Link
Power Up testing
Link at 100 Mbps
Link at 10 Mbps
Activity at 100 Mbps
Activity at 10 Mbps
Physical connections unplugged - No IP address obtained
Power Up testing
At least one port is connected and an IP address has been obtained
All ports are unplugged, but the card has an IP address.
Error: Duplicated IP address (*1)
The card is performing a BOOTP or DHCP sequence
The device does not have an IP address or powered off.
Power up testing.
The device has at least one established connection (even to the Message Router.)
The device has not established connections, but has obtained an IP address.
One or more of the connections in which this device is the target has timed out.
This shall be left only if all time out connections are reestablished or if the device is
reset.
The device has detected that its IP address is already in use (*1).
No power is supplied to the device.
Power Up testing.
The device is operating correctly.
The device has not been configured.
The device has detected a communication error (err8).
The device has detected an option unit error (e-23) (*1).
- 8 -
Description
E6581580
Advertisement
Table of Contents
